Description
KEY FEATURES:
- Privacy Protection–
The one way mirror window film provides great intended privacy during daytime only; the mirror-effect is reversed at night since the interior will be exposed to more light than the exterior. The side with the most light will have the mirror-like appearance
- Heat Insulation And Energy Saving –
the heat control window film can retain heat in winter and keep it out in summer, helping reduce expensive energy costs.
- Using The New Glue-
This home tinted window film is not sticky after water immersion and is easier to install than a glue film; after the water is dry up, the viscosity is restored and becomes even stronger. Remember to use a lot of soapy water to wet both the adhesive side and window surface
- Effective UV Rejection-
UV solvents added at the bottom, the window reflective film can blocks out 99% of UV rays, and reduces fading and aging of interior furnishings,anti-scratch layer on the surface, friction resisting, won’t fade nor blister, easy to remove, economical and practica”
Easy to Install and Remove: No adhesive, stick by static cling, simply to apply with a lot of soapy water. No worries about damage or residue when you remove.
Note:
The privacy effect of the window film will vary with the change of light and angle. The mirror effect means it has a slightly reflective effect, not totally like a mirror. The different effects between daytime and night: The outside glass will show a mirror effect as well as keep your privacy during the daytime. At night, the outdoor glass will lose the mirror effect, and people outside can see Inside. Therefore, curtains are necessary at night. (Reasons: The side with stronger light will have a mirror-like appearance, while the other side will be see-through. This means when indoor light is stronger than outdoor, people outside can see people inside. In general, people outside can’t see people inside during the daytime)
PRODUCT DETAILS
How to Find and Peel Off the Clear Backing Film:
Step 1 – Please wet one window film corner and use your fingers to twist it for a while to loosen the attachment between the window film and clear backing film;
Step 2 – Please attach a sticky tape to the side of the clear backing film corner , and then press it for effective attachment;
Step 3 – And then you are able to separate the clear backing film from the window film easily.
Useful Tips: Please make sure the glass, edges and corners are totally cleaned without any dust and tear off the protective film before paste it onto the glass.
Reviews
There are no reviews yet.